2002 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE

Fastener Tightening Specifications

Identifying Fastener Tightening Specifications

Application Specification
Metric English
Idler Arm to Frame Nut 99 N.m 73 lb ft
Idler Arm to Relay Rod Nut 62 N.m 46 lb ft
Pitman Arm to Relay Rod Nut 62 N.m 46 lb ft
Pitman Arm to Steering Gear Nut 250 N.m 184 lb ft
Steering Dampner to Frame Bracket Nut 40 N.m 30 lb ft
Steering Dampner to Relay Rod Nut 62 N.m 46 lb ft
Tie Rod Jam Nut 68 N.m 50 lb ft
Tie Rod to Steering Knuckle Nut 45 N.m 33 lb ft
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.