Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Cadillac Escalade EXTFACTORY OEM SERVICE PROCEDURE
Fastener Tightening Specifications
Identifying Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Flow Control Valve Actuator | 62 N.m | 46 lb ft |
| Power Steering Cooler Mounting Bolts | 5 N.m | 44 lb in |
| Power Steering Gear To Frame Bolts (Non-Rack and Pinion) | 135 N.m | 100 lb ft |
| Power Steering Pump Front Mounting Bolts | 50 N.m | 37 lb ft |
| Power Steering Pump Rear Mounting Bolt | 50 N.m | 37 lb ft |
| Pressure Hose Connection (At Gear) | 33 N.m | 24 lb ft |
| Pressure Hose Connection (At Pump) | 28 N.m | 20 lb ft |
| Steering Gear Side Cover Bolts | 60 N.m | 45 lb ft |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.