2001 Cadillac Seville SLSFACTORY OEM SERVICE PROCEDURE

Memory Seats: Notes

To program memory seats easy exit, use these following steps:

  1. Move seat to desired position.
  2. Press MEMORY SET button, located on driver's door trim panel.
  3. Press 1 or 2 button, depending on driver. A chime will sound to indicate setting has been saved.
  4. Repeat steps for second driver.
  5. Move seat to desired exit position.
  6. Press MEMORY SET button.
  7. Press EXIT button.
  8. Press No. 1 or 2 button, depending on driver. A chime will sound to indicate setting has been saved.
  9. Repeat steps for second driver.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.