Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Power Window System: Description
A permanent-magnet motor operates each power window. Each motor raises and lowers window when voltage is supplied by door module. Motor direction depends on polarity of supply voltage. Switches control supply voltage polarity.
Following components are used to control power windows:
- Driver Door Module (DDM).
- Passenger Front Door Module (PDM).
- Left Rear Door Module (LRDM).
- Right Rear Door Module (RRDM).
- Driver Door Switch Assembly (DDSA).
- Right front power window switch.
- Left rear power window switch.
- Right rear power window switch.
- Left front power window motor.
- Right front power window motor.
- Left rear power window motor.
- Right rear power window motor.
- Class 2 serial data link.
- PWR WDO circuit breaker.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
