2001 Cadillac DeVille BaseFACTORY OEM SERVICE PROCEDURE

Using Driver Information Center

To enter programming with Driver Information Center (DIC), perform following actions:

  1. Turn ignition switch to RUN position.
  2. Place transaxle in Park.
  3. Press MEMORY seat button No. 1 or 2 depending on driver for this session of personalization programming.
  4. Press INFO button on DIC until DIC displays FEATURE PROGRAMMING.
  5. Press ON/OFF button to enter programming mode.
  6. DIC displays DRIVER #1 or DRIVER #2 depending on chosen driver for this session of personalization programming.
  7. Press INFO button up or down to scroll through feature choices.

Continue with following steps to personalize automatic door locks with DIC:

  1. DIC displays DOORS LOCK IN GEAR.
  2. Press ON/OFF button to turn this feature ON or OFF.
  3. Press INFO button to advance to next option.
  4. Use ON/OFF button to turn one of following features On or OFF, only one choice can be On at any given time:
    • DRIVER UNLOCK IN PARK.
    • DRIVER UNLOCK AT KEY OFF.
    • DOORS UNLOCK IN PARK.
    • DOORS UNLOCK AT KEY OFF.
  5. Press INFO button to advance to next option.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.