Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 Cadillac CateraFACTORY OEM SERVICE PROCEDURE
Memory Seat Module
- Open driver's door. Connect scan tool to Data Link Connector (DLC). DLC is located below instrument panel, to right of steering column. Turn ignition switch to RUN position. Retrieve system related DTCs. If any system related DTCs exist, diagnose and repair system as necessary.
- If any system related DTCs do not exist, ensure there are no objects in front, behind or under driver's seat which may prevent full seat movement. Initialize system programming by following instructions on scan tool display. DO NOT press any seat adjuster, memory or mirror switch buttons.
- When scan tool displays PRESS MEMORY KEY & HOLD, press and hold memory button until scan tool displays RELEASE ALL KEY. If memory button is released before scan tool displays RELEASE ALL KEY, programming will resume when memory button is pressed.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
