2001 Cadillac CateraFACTORY OEM SERVICE PROCEDURE

Vehicle Communication Unit

  1. Record 11-digit (no letters) Electronic Serial Number (ESN) number from label on replacement Vehicle Communication Unit (VCU).
  2. Install replacement VCU.
  3. After replacement, press and hold OnStar(R) END CALL button (Black with White dot). Watch for OnStar(R) status light to change from Green to Red to Green.
  4. Press Blue OnStar(R) button to connect to OnStar(R). Tell advisor that this vehicle has a NEW VCU and a NEW ESN to put into customer's account. Follow any additional instructions given by advisor.
  5. Old VCU must be returned for core credit. Use address label included in original box. Failure to return core will result in a debit.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.