Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 Cadillac CateraFACTORY OEM SERVICE PROCEDURE
Memory Seat Control Module
NOTE:
Driver seat adjuster memory module requires programming after replacement. A scan tool is required to program driver seat adjuster memory module.
- To program memory seat control module, open driver's door. Do not close door until programming is completed. Install scan tool. Turn ignition on. Retrieve system related DTCs. If one or more DTCs exist, diagnose and repair as necessary. Erase system related DTCs.
- Ensure there are no objects in front, behind, or under driver's seat which may prevent full seat movement during initialization procedure. Initialize system programming and follow scan tool instructions. DO NOT press any manual adjustment switches for seat or outside rear view mirrors. DO NOT press memory switch or any of 3 position switches.
- Follow displayed scan tool messages and corresponding procedures. When PRESS MEMORY KEY & HOLD appears, press memory key and hold it until scan tool displays RELEASE ALL KEY. If memory key is released before scan tool displays RELEASE ALL KEYS, programming will continue when memory key is pressed.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
