2001 Cadillac CateraFACTORY OEM SERVICE PROCEDURE

Programming Automatic Door Locks

NOTE: Automatic door locks can be programmed to LOCK or UNLOCK when shifting transmission selector into or out of Park position. If more than one remote keyless entry transmitter is to be programmed, repeat procedures for second transmitter.
  1. Turn ignition on. Set transmission selector to Park position. Depress and hold brake pedal.
  2. Either all doors UNLOCK when shifting into Park position or all doors DO NOT UNLOCK when shifting into Park position. To toggle between either setting, press UNLOCK button on remote keyless entry transmitter 4 times. Each press should be held for about one second with less than 5 seconds between each press.
  3. Either all doors DO NOT LOCK when shifting out of Park position or all doors LOCK when shifting out of Park position. To toggle between either setting, press LOCK button on remote keyless entry transmitter 4 times. Each press should be held for about one second with no more than 5 seconds between each press.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.