2000 Cadillac EscaladeFACTORY OEM SERVICE PROCEDURE

Removal & Installation

WARNING: This page is about a different car, the 1999 GMC Sierra and 1999 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. On models equipped with air conditioning, set vent position to center instrument panel ducts. On all models, disconnect negative battery cable. Disable airbag system. See appropriate AIR BAG RESTRAINT SYSTEMS article.
  2. Apply parking brake. Shift transmission to first gear (automatic transmission only). Tilt steering wheel to full down position. Pull rearward gently on instrument panel bezel. Set instrument panel bezel aside. Remove instrument panel end panels.
  3. Remove left air outlet screws. Pull out on left air outlet. Disconnect electrical connectors. Remove left air outlet. Remove center air outlet screw. Remove center air outlet. Firmly pull right air outlet to left to release from instrument panel. Depress release tabs for assist handle, accessing them through air outlet duct holes.
  4. Remove door sill plates. Remove hinge pillar panels. Pull straight out on windshield pillar garnish moldings to remove. Remove instrument panel top cover. Unsnap 2 lock arms on remote control door lock receiver module. Disconnect electrical connector. Remove remote control door lock receiver module. To install, reverse removal procedure.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.