Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Cadillac CateraFACTORY OEM SERVICE PROCEDURE
Test C: Lock-Out Function Inoperative.
- If power window system check was performed, go to next step. If power window system check was not performed, perform system check. See SYSTEM CHECK under TROUBLE SHOOTING.
- Verify rear power window lock-out function is inoperative. If power window lock-out function is inoperative, go to next step. If power window lock-out function operates, problem is intermittent.
- Replace power accessory switch panel. See POWER ACCESSORY SWITCH PANEL under REMOVAL & INSTALLATION. Go to next step.
- Operate system in order to verify repair.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.