Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1998 Cadillac CateraFACTORY OEM SERVICE PROCEDURE
Power Window System Check
NOTE:
See appropriate system diagnostic test applicable to symptom.
- Turn ignition switch to RUN position. Operate each power window up and down from left front side door window switch (on console), and then from each individual window switch. Each power window should operate smoothly and quietly, with no sticking or mechanical noises.
- Operate each power window up and down from left front side door window switch (on console) only. Each power window should operate smoothly and quietly, with no sticking or mechanical noises.
- Operate each power window up and down from each individual door window switch. Each power window should operate smoothly and quietly, with no sticking or mechanical noises.
- Operate express function for each window from each individual side door window switch by holding switch in UP or DOWN position for one second. Express function on each power window should operate quietly and smoothly, with no sticking or mechanical noises.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.