Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Pcm Code E043, Left Oxygen (O2) Sensor Rich Signal: Description
PCM provides a .45-volt reference signal to O2 sensor on circuit No. 1589. When O2 sensor temperature is less than 392°F (200°C), O2 sensor signal voltage will be about .45 volt and PCM will keep system in "open loop" operation. When O2 sensor temperature is greater than 392°F (200°C), O2 sensor will begin to generate a signal voltage. In a rich environment, signal voltage will be greater than .45 volt. In a lean environment, signal voltage will be less than .45 volt. If PCM is in good control of air/fuel mixture, mixture will change from rich to lean rapidly (at least one change every 2 seconds).
When PCM sees O2 sensor is generating a signal voltage (greater than .45 volt), it will send system into "closed loop" operation. In "closed loop" operation, PCM will adjust fuel delivery rate to engine based on O2 sensor readings.
PCM Code E043 sets if O2 sensor stays at rich voltage more than 45 seconds during test conditions. PCM Code E043 sets when O2 sensor circuit fails or when air/fuel ratio is actually rich due to fuel control or emissions system fault.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.