2021 Buick Envision Avenir, AWDFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Total System 2.00 OZS. 0.05 L PAG Oil S
Air Cond Refrigerant 1.54 LBS. 0.69 KG R-1234yf For further details see "Air conditioner specification label". S
Automatic Transmission Fluid Drain Plug N/A N/A Automatic Transmission Fluid DEXRON VI Fluid Capacity is between: 5.3 - 6.3 qts. Approximate capacity. S
Automatic Transmission Fluid Overhaul N/A N/A Automatic Transmission Fluid DEXRON VI Fluid Capacity is between: 9.0 - 10 qts. Approximate capacity. S
Automatic Transmission Fluid Valve Body Cover Removal N/A N/A Automatic Transmission Fluid DEXRON VI Fluid Capacity is between: 2.1 - 3.2 qts. Approximate capacity. S
Brake Fluid 0.98 QTS. 0.92 L DOT 4 Hydraulic Brake Fluid S
Differential Gear Oil Rear,Differential Clutch Fill 0.37 QTS. 0.35 L Pentosin CHF - 11S S
Differential Gear Oil Rear,Differential Lubricant Fill 0.92 QTS. 0.87 L DEXRON LS Hypoid Fluid S
Engine Coolant 9.90 QTS. 9.36 L 50/50 mixture of DEX-COOL and clean, drinkable water After refill, the level must be checked. Add enough engine coolant so that the fluid is within the proper operating range. S
Engine Oil w/Filter 5.28 QTS. 4.99 L API - SAE 0W-20 ACDelco dexos1 gen 2 full synthetic engine oil. S
Fuel Tank AWD 16.30 GALS. 61.7 L S
Transfer Case Fluid 0.69 QTS. 0.65 L Power Transfer Unit (PTU) AAM S
Windshield Washer Fluid 4.80 QTS. 4.54 L Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.