Fastener Specifications

2020 Buick Encore BaseSECTION Fastener Specifications
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal.Β 

Application Specification
Metric (English)
Front Door Lock Striker Screw 22 N.m (16 lb ft)
Front Side Door Latch Screw 10 N.m (89 lb in)
Front Side Door Lock Cylinder Clamp Screw 5 N.m (44 lb in)
Front Side Door Outside Handle Bracket Screw 4 N.m (35 lb in)
Front Side Door Outside Handle Lock Cylinder Screw 9 N.m (80 lb in)
Liftgate Latch Screw 22 N.m (16 lb ft)
Liftgate Latch Striker Fastener 22 N.m (16 lb ft)
Liftgate Outside Handle Bolt 9 N.m (80 lb in)
Rear Side Door Latch Screw 10 N.m (89 lb in)
Rear Side Door Lock Striker Screw 22 N.m (16 lb ft)
Rear Side Door Outside Handle Bracket Screw 4 N.m (35 lb in)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.