Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 Buick EnvisionFACTORY OEM SERVICE PROCEDURE
Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Side Door Trim Panel Bolt | 2.5 N.m | 22 lb in |
| Inside Rearview Mirror Fastener | 1.8 N.m | 16 lb in |
| Outside Rearview Mirror Fastener | 9 N.m | 80 lb in |
| Outside Rearview Mirror Folding Control Module Fastener | 1.4 N.m | 12 lb in |
| Outside Rearview Mirror Housing Bezel Screw | 1.5 N.m | 13 lb in |
| Outside Rearview Mirror Inner Actuator Fastener | 0.8 N.m | 7 lb in |
| Outside Rearview Mirror Screw | 0.8 N.m | 7 lb in |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.