Fastener Specifications

2016 Buick Encore Base, AWDSECTION Fastener Specifications
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Brake Caliper Bleeder Valve 17 N.m 13 lb ft
Brake Caliper Bracket Bolt - Front 160 N.m 118 lb ft
Brake Caliper Bracket Bolt - Rear 100 N.m 74 lb ft
Brake Caliper Guide Pin Bolt 28 N.m 21 lb ft
Brake Caliper Vibration Dampener 9 N.m 80 lb in
Brake Hose Fitting Bolt 40 N.m 30 lb ft
Brake Rotor Bolt 9 N.m 80 lb in
Brake Shield Bolt 9 N.m 80 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.