SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2016ENCLAVE CONVENIENCEREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOLLISION/AVOIDANCEOBJECT DETECTION SYSTEM AND PEDESTRIAN PROTECTION SYSTEMREPAIR INSTRUCTIONSFRONT VIEW CAMERA REPLACEMENT
2016 Buick Enclave Convenience

Front View Camera Replacement

2016 Buick Enclave ConvenienceSECTION Front View Camera Replacement
Fig 1: Front View Camera
GM3975606Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the inside rearview mirror mount plate cover. Refer to Inside Rearview Mirror Mount Plate Replacement .
1 Front View Camera

Procedure

  1. Using a suitable plastic tool, insert the tool between the edge of the front view camera retainers, turn the tool to release the retainers and the camera and rotate downward.
  2. Disconnect the electrical connector.
  3. After replacement of the front view camera, program the front view camera. Refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.