Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK2015ENCLAVE CONVENIENCEREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTILOCK BRAKE SYSTEMSPECIFICATIONSFASTENER SPECIFICATIONS
2015 Buick Enclave Convenience
Fastener Specifications
2015 Buick Enclave ConvenienceSECTION Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Pipe Fittings- Brake Pressure Modulator Valve Inlet | 25 N.m | 18 lb ft |
| Brake Pipe Fittings- Brake Pressure Modulator Valve Outlet | 17 N.m | 13 lb ft |
| Brake Pressure Modulator Valve Bracket Nuts | 20 N.m | 15 lb ft |
| Brake Pressure Modulator Valve Insulator Nuts | 8 N.m | 71 lb in |
| Electronic Brake Control Module (EBCM) Bolts | 3 N.m | 27 lb in |
| Vehicle Yaw Sensor and Lateral Accelerometer Nuts | 9 N.m | 80 lb in |
| Wheel Speed Sensor Bolt- Front | 9 N.m | 80 lb in |
| Wheel Speed Sensor Bolt- Rear | 9 N.m | 80 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.