Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Buick Enclave ConvenienceFACTORY OEM SERVICE PROCEDURE
Circuit/System Testing
- Ignition OFF, disconnect the X1 harness connector at the radio.
- Disconnect the X2 harness connector at the vehicle communication interface control module.
- Ignition ON, test for less than 1 V between the vehicle communication interface control module cellular telephone voice signal circuit terminal 1 X2 and ground.
- If not the specified value, test the cellular telephone voice signal circuit for a short to voltage.
- Test for less than 1 V between the vehicle communication interface control module cellular telephone voice low reference circuit terminal 2 X2 and ground.
- If not the specified value, test the cellular telephone voice low reference circuit for a short to voltage.
- Ignition OFF, test for infinite resistance between the vehicle communication interface control module cellular telephone voice signal circuit terminal 1 X2 and ground.
- If not the specified value, test the cellular telephone voice signal circuit for a short to ground.
- Test for infinite resistance between the vehicle communication interface control module cellular telephone voice low reference circuit terminal 2 X2 and ground.
- If not the specified value, test the cellular telephone voice low reference circuit for a short to ground.
- Test for less than 2 Ξ© between the vehicle communication interface control module cellular telephone voice signal circuit terminal 1 X2 and the radio terminal 7 X2.
- If not the specified value, test the cellular telephone voice signal circuit for a open/high resistance.
- Test for less than 2 Ξ© between the vehicle communication interface control module cellular telephone voice low reference circuit terminal 2 X2 and the radio terminal 15 X2.
- If not the specified value, test the cellular telephone voice low reference circuit for a open/high resistance.
- If all circuits test normal, replace the vehicle communication interface control module.
- If all circuits test normal, replace the radio.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.