Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Wheel Alignment Specifications
All specifications are in degrees, convert to angular minutes, if necessary.
Conversion
- 1.00 degree = 60 angular minutes
- 0.75 degrees = 45 angular minutes
- 0.50 degrees = 30 angular minutes
- 0.25 degrees = 15 angular minutes
- 1.00 angular minute = 60 angular seconds
| 0.14 degrees * | 60 angular minutes / degree = | 8.40 angular minutes |
| 0.40 angular / minutes * | 60 angular seconds / angular minute = | 24.00 angular seconds |
|
NOTE:
Angular seconds up to 30 are rounded off, angular seconds beyond are rounded up to 60 angular seconds. |
||
| 24.00 angular seconds -> | 0 angular seconds = | 0.00 angular minute |
| 0.14 degrees = | 8.40 angular minutes = | 8.00 angular minutes |
| Condition: Full tank, no passengers and placed on plane ground. | ||
| Suspension | Camber L / R (°) |
Cross Camber (L-R) (°) |
Caster L / R (°) |
Cross Caster (L-R) (°) |
Steering Wheel Angle (°) |
Thrust Angle (L-R) / 2 (°) |
Total Toe (°) |
Toe-in variation with inner wheel deflection of 20° (°) |
|---|---|---|---|---|---|---|---|---|
| Front | -0.40 ± 0.75 | 0.00 ± 0.75 | 4.40 ± 0.75 | 0.00 ± 0.75 | 0.00 ± 3.50 | - | 0.10 ± 0.20 | 18.30 |
| Rear | -1.45 ± 0.75 | 0.00 ± 0.60 | - | - | - | 0.00 ± 0.30 | 0.15 ± 0.40 | - |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.