Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Approximate Fluid Capacities
The following approximate capacities are given in US English and metric conversions. See Fluid and Lubricant Recommendations for more information. All capacities are approximate. When adding, be sure to fill to the approximate level as recommended in this manual. Recheck fluid level after filling.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Cooling System | ||
|
7.8 liters | 8.2 quarts |
|
7.1 liters | 7.5 quarts |
| Engine Oil with Filter | ||
|
5.7 liters | 6.0 quarts |
|
4.7 liters | 5.0 quarts |
| Fuel Tank | ||
| 2.0L, 2.4L L4 Engine with NU5 and NT7 Emissions | 73.9 liters | 19.5 gallons |
| 2.4L L4 Engine with NU6 Emissions | 70.0 liters | 18.5 gallons |
| Transmission Fluid (Drain and Refill) | ||
|
- | - |
|
8.4 liters | 8.9 quarts |
| Transfer Case | 0.65 liter | 0.687 quart |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.