Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Installation Procedure
- Install the fuel filler pipe.
- Install the fuel filler pipe screw to the underbody.
Tighten: Tighten the screw to 13 N.m (115 lb in).
- Verify that the filler hose (4) is fully seated on the fuel tank port an the fuel filler pipe (2).
- Ensure that the fuel tank filler pipe hose clamp (1) is properly located on the tank port between the bead (5) and the pipe (3).
Tighten: Tighten the hose clamp to 2.5 N.m (22 lb in).
- Lower the vehicle.
- Install the fuel filler pipe screws to the fuel filler pocket.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
- Add fuel and install the fuel fill cap.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.