Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBUICK1999REGAL LSREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMENGINE CONTROL SYSTEM - SYSTEM TESTING & ENGINE COMPONENT TESTSCOMPUTERIZED ENGINE CONTROLSPOWERTRAIN CONTROL MODULE (PCM) CONNECTOR TERMINAL IDENTIFICATIONPOWERTRAIN CONTROL MODULE (PCM) CONNECTOR TERMINAL IDENTIFICATION (3.1L - CENTURY)
1999 Buick Regal LS
Powertrain Control Module (Pcm) Connector Terminal Identification (3.1L - Century)
1999 Buick Regal LSSECTION Powertrain Control Module (Pcm) Connector Terminal Identification (3.1L - Century)
POWERTRAIN CONTROL MODULE (PCM) CONNECTOR TERMINAL IDENTIFICATION (3.1L - CENTURY) (1)
| Connector | Terminal No. | Wire Color | Function | ||
|---|---|---|---|---|---|
| C1 | 1 | BLK | Transmission Fluid Temperature Sensor Ground | ||
| C1 | 2 & 3 | ..... | Not Used | ||
| C1 | 4 | LT GRN | 1-2 Shift Solenoid Valve Control | ||
| C1 | 5 | DK BLU | Cooling Fan High Speed Control | ||
| C1 | 6 | DK GRN | Cooling Fan Low Speed Control | ||
| C1 | 7 | BLK | Camshaft Position PWM Input | ||
| C1 | 8 | PPL/WHT | Crankshaft Position 3x Sensor Reference | ||
| C1 | 9 | LT BLU/BLK | Crankshaft Position 24x Sensor Reference | ||
| C1 | 10 | GRY | Manifold Absolute Pressure High | ||
| C1 | 11 & 12 | ..... | Not Used | ||
| C1 | 13 | ORG/BLK | Engine Coolant Temperature/Manifold Absolute Pressure Sensor Ground | ||
| C1 | 14 & 15 | ..... | Not Used | ||
| C1 | 16 | BLK/WHT | Powertrain Control Module Ground | ||
| C1 | 17 | BLK | Intake Air Temperature Sensor Ground | ||
| C1 | 18 | ..... | Not Used | ||
| C1 | 19 | PPL | Ignition Positive Voltage | ||
| C1 | 20 | ORG | Battery Positive Voltage | ||
| C1 | 21-27 | ..... | Not Used | ||
| C1 | 28 | TAN/WHT | Heated Oxygen Sensor No. 2 Signal Low | ||
| C1 | 29 | TAN | Heated Oxygen Sensor No. 1 Signal Low | ||
| C1 | 30 | PPL | Torque Converter Clutch Brake Switch Input | ||
| C1 | 31 | BLK | EGR Pintle Position Sensor Ground | ||
| C1 | 32 | GRY | EGR Valve Control | ||
| C1 | 33 | DK BLU | Knock Sensor Signal | ||
| C1 | 34-37 | ..... | Not Used | ||
| C1 | 38 | LT GRN/WHT | Idle Air Control Valve "B" High | ||
| C1 | 39-42 | ..... | Not Used | ||
| C1 | 43 | BLK | Fuel Injector No. 1 Control | ||
| C1 | 44 | YEL/BLK | 2-3 Shift Solenoid Valve | ||
| C1 | 45 | ..... | Not Used | ||
| C1 | 46 | PNK/BLK | Fuel Injector No. 3 Control | ||
| C1 | 47 | LT GRN/BLK | Fuel Injector No. 2 Control | ||
| C1 | 48 | RED/BLK | Reference Low | ||
| C1 | 49-52 | ..... | Not Used | ||
| C1 | 53 | TAN/BLK | By-Pass Valve Control | ||
| C1 | 54 | WHT | Ignition Control | ||
| C1 | 55 | DK GRN/WHT | Vehicle Speed Sensor Signal Output | ||
| C1 | 56 | BLK/WHT | Powertrain Control Module Ground | ||
| C1 | 57 | BLK/WHT | Powertrain Control Module Ground | ||
| C1 | 58 | DK GRN | Serial Data (Class II) | ||
| C1 | 59 | ..... | Not Used | ||
| C1 | 60 | BLK/WHT | Powertrain Control Module Ground | ||
| C1 | 61 | BLK | Throttle Position Sensor Ground | ||
| C1 | 62 & 63 | ..... | Not Used | ||
| C1 | 64 | YEL | Vehicle Speed Sensor High | ||
| C1 | 65 | PPL | Vehicle Speed Sensor Low | ||
| C1 | 66 & 67 | ..... | Not Used | ||
| C1 | 68 | YEL | Transaxle Range Switch "B" | ||
| C1 | 69 | YEL | Mass Airflow Sensor Signal | ||
| C1 | 70 & 71 | ..... | Not Used | ||
| C1 | 72 | DK GRN | Cruise Control Disable/Inhibit Control | ||
| C1 | 73 | BLK/WHT | Fuel Injector No. 5 Control | ||
| C1 | 74 & 75 | ..... | Not Used | ||
| C1 | 76 | DK GRN/WHT | EVAP Canister Purge Valve Control | ||
| C1 | 77 & 78 | ..... | Not Used | ||
| C1 | 79 | YEL/BLK | Fuel Injector No. 6 Control | ||
| C1 | 80 | BLK | A/C Refrigerant Pressure Sensor Ground | ||
| C2 | 1 | ..... | Not Used | ||
| C2 | 2 | WHT | EVAP Canister Vent Valve Solenoid Control | ||
| C2 | 3 | DK GRN/WHT | Fuel Pump Relay Control | ||
| C2 | 4 | WHT | EGR Valve Ignition Positive Voltage | ||
| C2 | 5 | BRN/WHT | Malfunction Indicator Light Control | ||
| C2 | 6 | ..... | Not Used | ||
| C2 | 7 | LT BLU/WHT | Idle Air Control Valve "A" High | ||
| C2 | 8 & 9 | ..... | Not Used | ||
| C2 | 10 | PPL | Heated Oxygen Sensor No. 1 Signal High | ||
| C2 | 11 | PPL/WHT | Heated Oxygen Sensor No. 2 Signal High | ||
| C2 | 12-15 | ..... | Not Used | ||
| C2 | 16 | WHT | Transaxle Range Switch "P" | ||
| C2 | 17 | ..... | Not Used | ||
| C2 | 18 | BLK/WHT | Transaxle Range Switch "A" | ||
| C2 | 19 | TAN/BLK | Engine Oil Pressure Switch Input | ||
| C2 | 20 & 21 | ..... | Not Used | ||
| C2 | 22 | DK GRN/WHT | A/C Request | ||
| C2 | 23 | PPL | Ignition Positive Voltage (Start Only) | ||
| C2 | 24 | PNK | Ignition Positive Voltage (Run/Start) | ||
| C2 | 25 | LT GRN | Manifold Absolute Pressure Sensor Signal | ||
| C2 | 26 | YEL | Engine Coolant Temperature Sensor Signal | ||
| C2 | 27 | RED/BLK | A/C Refrigerant Pressure Sensor Signal | ||
| C2 | 28 | BRN | EGR Pintle Position Signal | ||
| C2 | 29 | GRY | Generator Terminal "F" Monitor | ||
| C2 | 30 | GRY | 5-Volt Reference "A" | ||
| C2 | 31 & 32 | ..... | Not Used | ||
| C2 | 33 | GRY | 5-Volt Reference "A" | ||
| C2 | 34 | GRY | 5-Volt Reference "B" | ||
| C2 | 35 | BLK | Sensor Ground | ||
| C2 | 36-38 | ..... | Not Used | ||
| C2 | 39 | DK GRN/WHT | A/C Compressor Clutch Relay Control | ||
| C2 | 40 & 41 | ..... | Not Used | ||
| C2 | 42 | LT BLU/BLK | Fuel Injector No. 4 Control | ||
| C2 | 43 | ..... | Not Used | ||
| C2 | 44 | LT BLU/BLK | Idle Air Control Valve "A" Low | ||
| C2 | 45-48 | ..... | Not Used | ||
| C2 | 49 | LT GRN/BLK | Idle Air Control Valve "B" Low | ||
| C2 | 50 | TAN | Intake Air Temperature Sensor | ||
| C2 | 51-54 | ..... | Not Used | ||
| C2 | 55 | DK GRN | Fuel Tank Pressure Sensor Signal | ||
| C2 | 56 | GRY | Transaxle Range Switch "C" | ||
| C2 | 57 | ..... | Not Used | ||
| C2 | 58 | BRN | Engine Oil Level Switch Input | ||
| C2 | 59 | WHT | Cruise Control Status | ||
| C2 | 60 | ..... | Not Used | ||
| C2 | 61 | RED | Generator Terminal "L" Control | ||
| C2 | 62-65 | ..... | Not Used | ||
| C2 | 66 | DK BLU | Throttle Position Sensor Signal | ||
| C2 | 67 | ..... | Not Used | ||
| C2 | 68 | YEL/BLK | Transaxle Fluid Temperature Sensor | ||
| C2 | 69 | PPL | Fuel Level Sensor Input | ||
| C2 | 70 | LT GRN | Crankshaft Position Sensor Battery Positive Voltage | ||
| C2 | 71 | ..... | Not Used | ||
| C2 | 72 | RED/WHT | Camshaft Position Sensor Battery Positive Voltage | ||
| C2 | 73 | BLK | Camshaft Position Sensor Ground | ||
| C2 | 74 | YEL/BLK | Crankshaft Position Sensor Ground | ||
| C2 | 75 | ..... | Not Used | ||
| C2 | 76 | YEL/BLK | Starter Enable Control | ||
| C2 | 77 | ..... | Not Used | ||
| C2 | 78 | BRN | Torque Converter Clutch PWM Solenoid Control | ||
| C2 | 79 | TAN/BLK | Torque Converter Clutch Solenoid Control | ||
| C2 | 80 | ..... | Not Used | ||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.