Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Memory Recall
When DRIVER-1 or DRIVER-2 button is pressed, memory seat/mirror module receives input and single chime will sound. Memory seat/mirror module supplies battery voltage to seat motors until all seat position sensor feedback voltages equal voltages stored in memory for appropriate driver. When DRIVER-1 and DRIVER-2 buttons are pressed simultaneously or EXIT button is pressed, driver's seat will move fully back and down. Memory recall and easy exit functions will operate only when ignition switch is in OFF position or gear selector is in PARK.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.