1997 Buick Century CustomFACTORY OEM SERVICE PROCEDURE

DTC B2735, Pass-Key(R) Programming Mode Active: Testing

  1. If BCM diagnostic system check was performed, go to next step. If BCM diagnostic system check was not performed, go to BCM DIAGNOSTIC SYSTEM CHECKΒ  .
  2. Perform BCM programming procedure for PASS-Key(R) II system. See THEFT DETERRENT RELEARNΒ  under BCM PROGRAMMING. Go to next step.
  3. Turn ignition off. Reinstall all components and connectors. Turn ignition on. Clear DTCs. Check for DTCs. If DTC B2735 sets again, go to next step. If DTC B2735 does not set again, system is operating properly.
  4. Using scan tool, check for PASS-Key(R) II DTCs B2722 or B2723. If either of these DTCs are present, go to appropriate DTC test. If these DTCs are not present, go to next step.
  5. Turn ignition off. Replace BCM. See REMOVAL & INSTALLATIONΒ  . Reprogram BCM. See BCM PROGRAMMING. Go to next step.
  6. Turn ignition off. Reinstall all components and connectors. Turn ignition on. Using scan tool, clear DTCs. Perform BCM DIAGNOSTIC SYSTEM CHECKΒ  .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.