1995 Buick Roadmaster BaseFACTORY OEM SERVICE PROCEDURE

A/C System Specifications

WARNING: This page is about a different car, the 1995 Chevrolet Caprice. However, it is still accessible from the selected car via links, so may be relevant.
A/C SYSTEM SPECIFICATIONS

Application Specification
Compressor Type Harrison HD6/HR6-HE 6-Cyl.
Compressor Belt Tension (1)
System Oil Capacity (2) 8 ozs.
Refrigerant (R-134a) Capacity 28 ozs.
System Operating Pressures (3)
High Side 315 psi (22.1 kg/cm2 )
Low Side 36 psi (2.5 kg/cm2 )
(1) Equipped with automatic belt tensioner. If indicator marks on tensioner is not within range, replace serpentine belt.
(2) Use PAG Refrigerant Oil (Part No. 12345923).
(3) With ambient temperature at 80Β°F (27Β°C) and relative humidity at 60 percent.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.