Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1994 Buick Century Base, 2.2 4FACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 8.00 OZS. | 0.23 L | PAG 150 | S | |||
| Air Cond Refrigerant | 2.2L Eng | 1.75 LBS. | 0.79 KG | R-134a | S | ||
| Automatic Transmission Fluid | 2.2L Eng | Complete Overhaul | 7.00 QTS. | 6.62 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S |
| Automatic Transmission Fluid | 2.2L Eng | Pan Removal and Replacement | 4.00 QTS. | 3.78 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 2.2L Eng | Complete System | 11.60 QTS. | 10.97 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Coolant | 2.2L Eng | Radiator and Engine | 9.18 QTS. | 8.68 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Oil | 4.00 QTS. | 3.78 L | API - SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | S | |||
| Fuel Tank | 16.50 GALS. | 62.45 L | S | ||||
| Power Steering Fluid | Complete System | 1.66 PTS. | 0.78 L | GM Hydraulic Power Steering Fluid | S | ||
| Power Steering Fluid | Pump Only | 0.13 PTS. | 0.06 L | GM Hydraulic Power Steering Fluid | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
