1992 Buick Roadmaster BaseFACTORY OEM SERVICE PROCEDURE

Minimum Throttle Valve Pressure Check

  1. Ensure throttle valve cable is properly adjusted. Attach pressure gauge to line pressure tap. See Figure . Apply parking brake and service brakes.
  2. Check line pressure as specified. See OIL PRESSURE SPECIFICATION CHARTSΒ  . Pressure readings must be within specification. If pressure reading is not within specification, see TROUBLE SHOOTINGΒ  .
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.