Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1985 Buick Riviera T-TypeFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Automatic Transmission Fluid | Overhaul | 12.00 QTS. | 11.35 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S | |
| Automatic Transmission Fluid | Pan Removal and Replacement | 5.00 QTS. | 4.73 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | GM Part No. 12377967 or DOT 3 equivalent. | S | ||
| Differential Gear Oil | N/A | N/A | API - GL-5, SAE 80W-90 | GM Part No. 1052271. | S | ||
| Engine Coolant | 3.8L Eng | w/Air Cond | 13.00 QTS. | 12.3 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Coolant | 3.8L Eng | w/Heavy Duty Cooling | 14.00 QTS. | 13.24 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S |
| Engine Oil | 3.8L Eng | 5.00 QTS. | 4.73 L | SAE 5W-30 (60Deg.F to Below -20Deg.F) 10W-30 (Preferred) or 10W-40 (0Deg.F to Above 100Deg.F), 15W-40 (15Deg.F to Above100Deg.F), 20W-20, 20W-40 or 20W-50 (20Deg.F to Above 100Deg.F), 30 (40Deg.F to Above 100Deg.F) | S | ||
| Fuel Tank | Eng VIN 9 | 21.00 GALS. | 79.49 L | S | |||
| Power Steering Fluid | N/A | N/A | GM Power Steering Fluid | GM Part No. 1050017. | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.