1983 Buick Skyhawk T-Type, AutomaticFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Automatic Transmission Fluid 4.00 QTS. 3.78 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Differential Gear Oil Rear N/A N/A API - GL-5, SAE 80W-90 GM Part No. 1052271 or GM Part No. 1052272. S
Engine Coolant 1.8L Eng w/Air Cond 7.89 QTS. 7.46 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Coolant 1.8L Eng w/Heater 7.84 QTS. 7.41 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Oil 1.8L Eng 3.00 QTS. 2.83 L SAE 5W-30 (Below -20Deg.F to 100Deg.F), 10W-30 or 10W-40 (0Deg.F to Above 100Deg.F) S
Fuel Tank 13.61 GALS. 51.51 L S
Manual Transmission Fluid 3.00 QTS. 2.83 L Automatic Transmission Fluid DEXRON II S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 1050017. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.