SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2021I3 RANGE EXTENDERREPAIR AND DIAGNOSISGENERAL INFORMATIONOEM GENERAL INFORMATIONGENERAL ORPHAN DATAREMOVE ENGINE COMPARTMENT FAN
2021 BMW i3 Range Extender

Remove engine compartment fan

2021 BMW i3 Range ExtenderSECTION Remove engine compartment fan
  • Loosen screws (1).
  • Remove the sound insulation (2).
    G11145054Courtesy of BMW OF NORTH AMERICA, INC.
  • Unlock and disconnect connector (1) for the engine compartment fan.
  • Unlock and disconnect connector (2) on temperature sensor.
  • Unclip cable from fan cowl.
  • Loosen screw (3).
    G11145055Courtesy of BMW OF NORTH AMERICA, INC.
  • Loosen screws (1).
  • Remove engine compartment fan (2).
G11145056Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.