Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 BMW X7 M50iFACTORY OEM SERVICE PROCEDURE
Variable Valve Timing Control System - Repair (G07) (1 Of 4)
- 11 36 Variable Valve Timing Control System (VANOS)
- 11 36 042 Removing and installing/replacing intake adjuster (X7 xDrive40i 2019-2022)
- Releasing the VANOS central valve of the intake adjuster
- Removing the VANOS central valve of the intake adjuster
- Removing intake adjuster
- Installing the intake adjuster
- Installing the VANOS central valve of the intake adjuster
- Releasing VANOS central valve of the exhaust camshaft adjuster
- Installing the VANOS central valve of the exhaust camshaft adjuster
- Remove the test gauges for securing the camshafts
- Adjusting the camshafts with the special tool
- Pre-tensioning the timing chain with the special tool
- Tightening the VANOS central valve of the exhaust camshaft adjuster
- Tightening the VANOS central valve of the intake adjuster
- 11 36 044 Remove and install/replace the exhaust camshaft adjuster (X7 xDrive40i 2019-2022)
- Releasing VANOS central valve of the exhaust camshaft adjuster
- Removing the VANOS central valve of the exhaust camshaft adjuster
- Remove exhaust camshaft adjuster
- Install exhaust camshaft adjuster
- Installing the VANOS central valve of the exhaust camshaft adjuster
- Releasing the VANOS central valve of the intake adjuster
- Installing the VANOS central valve of the intake adjuster
- Remove the test gauges for securing the camshafts
- Adjusting the camshafts with the special tool
- Pre-tensioning the timing chain with the special tool
- Tightening the VANOS central valve of the exhaust camshaft adjuster
- Tightening the VANOS central valve of the intake adjuster
- 11 36 046 Removing and installing/replacing the intake and exhaust camshaft adjusters (X7 xDrive40i 2019-2022)
- Releasing the VANOS central valve of the intake adjuster
- Releasing VANOS central valve of the exhaust camshaft adjuster
- Removing the VANOS central valve of the intake adjuster
- Removing the VANOS central valve of the exhaust camshaft adjuster
- Removing intake adjuster
- Remove exhaust camshaft adjuster
- Installing the intake adjuster
- Install exhaust camshaft adjuster
- Installing the VANOS central valve of the exhaust camshaft adjuster
- Installing the VANOS central valve of the intake adjuster
- Remove the test gauges for securing the camshafts
- Adjusting the camshafts with the special tool
- Pre-tensioning the timing chain with the special tool
- Tightening the VANOS central valve of the exhaust camshaft adjuster
- Tightening the VANOS central valve of the intake adjuster
- 11 36 125 Removing and installing/replacing intake VANOS central valve (right, where applicable) (X7 xDrive40i 2019-2022)
- Releasing the VANOS central valve of the intake adjuster
- Removing the VANOS central valve of the intake adjuster
- Installing the VANOS central valve of the intake adjuster
- Releasing VANOS central valve of the exhaust camshaft adjuster
- Installing the VANOS central valve of the exhaust camshaft adjuster
- Remove the test gauges for securing the camshafts
- Adjusting the camshafts with the special tool
- Pre-tensioning the timing chain with the special tool
- Tightening the VANOS central valve of the exhaust camshaft adjuster
- Tightening the VANOS central valve of the intake adjuster
- 11 36 126 Remove and install/replace the exhaust VANOS central valve (right, where applicable) (X7 xDrive40i 2019-2022)
- Releasing VANOS central valve of the exhaust camshaft adjuster
- Removing the VANOS central valve of the exhaust camshaft adjuster
- Installing the VANOS central valve of the exhaust camshaft adjuster
- Releasing the VANOS central valve of the intake adjuster
- Installing the VANOS central valve of the intake adjuster
- Remove the test gauges for securing the camshafts
- Adjusting the camshafts with the special tool
- Pre-tensioning the timing chain with the special tool
- Tightening the VANOS central valve of the exhaust camshaft adjuster
- Tightening the VANOS central valve of the intake adjuster
- 11 36 127 Removing and installing/replacing both VANOS central valves (right, where applicable) (X7 xDrive40i 2019-2022)
- Releasing the VANOS central valve of the intake adjuster
- Releasing VANOS central valve of the exhaust camshaft adjuster
- Removing the VANOS central valve of the intake adjuster
- Removing the VANOS central valve of the exhaust camshaft adjuster
- Installing the VANOS central valve of the intake adjuster
- Installing the VANOS central valve of the exhaust camshaft adjuster
- Remove the test gauges for securing the camshafts
- Adjusting the camshafts with the special tool
- Pre-tensioning the timing chain with the special tool
- Tightening the VANOS central valve of the exhaust camshaft adjuster
- Tightening the VANOS central valve of the intake adjuster
- 11 36 658 Removing and installing/replacing both actuators (after vehicle diagnosis) (X7 xDrive40i 2019-2022)
- 11 36 048 Removing and installing/replacing both adjusters, right (X7 xDrive50i 2019-2020)
- Moving the crankshaft into the installation position of cylinder bank 1
- Checking the VANOS adjuster of cylinder bank 1
- Relieving the chain tensioner at cylinder bank 1 for checking or setting the valve timings
- Removing hydraulic chain tensioner of cylinder bank 1
- Preloading the timing chain of cylinder bank 1
- Fixing the engine in the installation position on cylinder 1 (set valve timings)
- Removing, installing, replacing the VANOS adjusters on the right
- Removing the special tool to pretension the timing chain at cylinder bank 1
- Installing the hydraulic chain tensioner of cylinder bank 1
- 11 36 112 Removing and installing/replacing the intake adjuster, left (X7 xDrive50i 2019-2020)
- Remove the sealing cap on the cylinder head of the cylinder bank 2
- Moving the crankshaft to the installation position to adjust the timings
- Check the VANOS adjuster of cylinder bank 2
- Relaxing chain tensioner on bank 2 for checking or setting timing
- Removing hydraulic chain tensioner of cylinder bank 2
- Preloading the timing chain of cylinder bank 2
- Fixing the engine in the installation position on cylinder 1 (set valve timings)
- Replacing the left intake VANOS adjuster
- Removing special tool to pretension timing chain on cylinder bank 2
- Installing the hydraulic chain tensioner of cylinder bank 2
- Installing the sealing cap on the cylinder head of cylinder bank 2
- 11 36 114 Removing and installing/replacing left exhaust camshaft adjuster (X7 xDrive50i 2019-2020)
- Remove the sealing cap on the cylinder head of the cylinder bank 2
- Moving the crankshaft to the installation position to adjust the timings
- Check the VANOS adjuster of cylinder bank 2
- Relaxing chain tensioner on bank 2 for checking or setting timing
- Removing hydraulic chain tensioner of cylinder bank 2
- Preloading the timing chain of cylinder bank 2
- Fixing the engine in the installation position on cylinder 1 (set valve timings)
- Replacing the exhaust camshaft adjuster on the left
- Removing special tool to pretension timing chain on cylinder bank 2
- Installing the hydraulic chain tensioner of cylinder bank 2
- Installing the sealing cap on the cylinder head of cylinder bank 2
- 11 36 116 Removing and installing/replacing intake adjuster, right (X7 xDrive50i 2019-2020)
- Remove the sealing cap on the cylinder head of the cylinder bank 1
- Moving the crankshaft to the installation position to adjust the timings
- Checking the VANOS adjuster of cylinder bank 1
- Relieving the chain tensioner at cylinder bank 1 for checking or setting the valve timings
- Removing hydraulic chain tensioner of cylinder bank 1
- Preloading the timing chain of cylinder bank 1
- Fixing the engine in the installation position on cylinder 1 (set valve timings)
- Replacing the right intake adjuster
- Removing the special tool to pretension the timing chain at cylinder bank 1
- Installing the hydraulic chain tensioner of cylinder bank 1
- Install the sealing cap on the cylinder head of cylinder bank 1
- 11 36 118 Removing and installing/replacing exhaust camshaft adjuster, right (X7 xDrive50i 2019-2020)
- Remove the sealing cap on the cylinder head of the cylinder bank 1
- Moving the crankshaft to the installation position to adjust the timings
- Checking the VANOS adjuster of cylinder bank 1
- Relieving the chain tensioner at cylinder bank 1 for checking or setting the valve timings
- Removing hydraulic chain tensioner of cylinder bank 1
- Preloading the timing chain of cylinder bank 1
- Fixing the engine in the installation position on cylinder 1 (set valve timings)
- Replacing the right exhaust camshaft adjuster
- Removing the special tool to pretension the timing chain at cylinder bank 1
- Installing the hydraulic chain tensioner of cylinder bank 1
- Install the sealing cap on the cylinder head of cylinder bank 1
- 11 36 125 Removing and installing/replacing intake VANOS central valve (right, where applicable) (X7 xDrive50i 2019-2020)
- Moving the crankshaft into the installation position of cylinder bank 1
- Checking the VANOS adjuster of cylinder bank 1
- Relieving the chain tensioner at cylinder bank 1 for checking or setting the valve timings
- Removing hydraulic chain tensioner of cylinder bank 1
- Preloading the timing chain of cylinder bank 1
- Fixing the engine in the installation position on cylinder 1 (set valve timings)
- Replace intake central valve, right
- Removing the special tool to pretension the timing chain at cylinder bank 1
- Installing the hydraulic chain tensioner of cylinder bank 1
- 11 36 126 Remove and install/replace the exhaust VANOS central valve (right, where applicable) (X7 xDrive50i 2019-2020)
- Moving the crankshaft into the installation position of cylinder bank 1
- Checking the VANOS adjuster of cylinder bank 1
- Relieving the chain tensioner at cylinder bank 1 for checking or setting the valve timings
- Removing hydraulic chain tensioner of cylinder bank 1
- Preloading the timing chain of cylinder bank 1
- Fixing the engine in the installation position on cylinder 1 (set valve timings)
- Replacing the right central exhaust valve
- Removing the special tool to pretension the timing chain at cylinder bank 1
- Installing the hydraulic chain tensioner of cylinder bank 1
- 11 36 127 Removing and installing/replacing both VANOS central valves (right, where applicable) (X7 xDrive50i 2019-2020)
- Moving the crankshaft into the installation position of cylinder bank 1
- Checking the VANOS adjuster of cylinder bank 1
- Relieving the chain tensioner at cylinder bank 1 for checking or setting the valve timings
- Removing hydraulic chain tensioner of cylinder bank 1
- Preloading the timing chain of cylinder bank 1
- Fixing the engine in the installation position on cylinder 1 (set valve timings)
- Replacing both right VANOS central valves
- Removing the special tool to pretension the timing chain at cylinder bank 1
- Installing the hydraulic chain tensioner of cylinder bank 1
- 11 36 128 Removing and installing/replacing intake VANOS central valve, left (X7 xDrive50i 2019-2020)
- Remove the sealing cap on the cylinder head of the cylinder bank 2
- Moving the crankshaft to the installation position to adjust the timings
- Check the VANOS adjuster of cylinder bank 2
- Relaxing chain tensioner on bank 2 for checking or setting timing
- Removing hydraulic chain tensioner of cylinder bank 2
- Preloading the timing chain of cylinder bank 2
- Fixing the engine in the installation position on cylinder 1 (set valve timings)
- Removing the intake camshaft of VANOS central valve at left
- Installing the left intake VANOS central valve
- Removing special tool to pretension timing chain on cylinder bank 2
- Installing the hydraulic chain tensioner of cylinder bank 2
- Installing the sealing cap on the cylinder head of cylinder bank 2
- 11 36 042 Removing and installing/replacing intake adjuster (X7 xDrive40i 2019-2022)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.