11 00 STANDARD SCREW CONNECTION - TIGHTENING TORQUE SPECIFICATION

	Thread	Measure
1AZ Screws and nuts	M5	5 Nm ± 0.5
2AZ Screws and nuts	M6	8 Nm ±±1
3AZ Screws and nuts	M7	13 Nm±2
4AZ Screws and nuts	M8	19 Nm±3
5AZ Screws and nuts	M10	38 Nm±5
6AZ Hose clamp, WAF 5		1.0 to 1.5 Nm
7AZ Hose clamp, WAF 6		2.5 up to3.5 Nm

11 00 TIGHTENING TORQUE OVERVIEW

Engine mounting bracket on assembly jig
M14x95	Tightening torque	130 Nm
Engine mount to engine mounting bracket
Hexagon screws from special tool set	Tightening torque	105 Nm
Motor mount on the engine stand
M10	Tightening torque	100 Nm
Standard screw connection 4 Nm
Oval-head screw	Tightening torque	4 Nm
Standard screw connection hose clamp 5
Hose clamp L12 - L15	tightening torque	1.25 Nm
Standard screw connectionM10
M10		38 Nm
Standard screw connectionM5
M5		5 Nm
Standard screw connectionM6
M6	tightening torque	8 Nm
Standard screw connectionM7
M7		13 Nm
Standard screw connectionM8
M8	tightening torque	19 Nm

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

11 00 Engine