2019 BMW M5 CompetitionFACTORY OEM SERVICE PROCEDURE

Converting the production date

Precondition 

A production date and no expiration date is printed on the gas pressure springs for hood.

If an expiration date is printed: Continue with step 3.

  • The production date (2) has the format (days/year).
  • The production date must be converted to the (month/year) format.
  • For the conversion, it is necessary to first determine whether the printed year is a leap year.
    G15264499Courtesy of BMW OF NORTH AMERICA, INC.
    Leap year
    ...
    2000
    2004
    2008
    2012
    2016
    2020
    2024
    2028
    2032
    2036
    2040
    2044
    ...
  • 2016 is a leap year (example from the illustration).
  • In the second step, the imprinted day number (2) is converted to the month using one of the following tables.
    REGULAR YEAR

    Month Days Day number
    January 31 1 ≤ n ≤ 31
    February 28 32 ≤ n ≤ 59
    March 31 60 ≤ n ≤ 90
    April 30 91 ≤ n ≤ 120
    May 31 121 ≤ n ≤ 151
    June 30 152 ≤ n ≤ 181
    July 31 182 ≤ n ≤ 212
    August 31 213 ≤ n ≤ 243
    September 30 244 ≤ n ≤ 273
    October 31 274 ≤ n ≤ 304
    November 30 305 ≤ n ≤ 334
    December 31 335 ≤ n ≤ 365
    LEAP YEAR

    Month Days Day number
    January 31 1 ≤ n ≤ 31
    February 29 32 ≤ n ≤ 60
    March 31 61 ≤ n ≤ 91
    April 30 92 ≤ n ≤ 121
    May 31 122 ≤ n ≤ 152
    June 30 153 ≤ n ≤ 182
    July 31 183 ≤ n ≤ 213
    August 31 214 ≤ n ≤ 244
    September 30 245 ≤ n ≤ 274
    October 31 275 ≤ n ≤ 305
    November 30 306 ≤ n ≤ 335
    December 31 336 ≤ n ≤ 365
  • 253 corresponds to the month of September (example from the illustration).
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.