2016 BMW X5 xDrive40eFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil Gas/Electric 1.60 OZS. 0.04 L Sanden SP-A2 See Underhood Decal for oil capacity. S
Air Cond Refrigerant 1.50 LBS. 0.68 KG R-134a Part No. 83 19 9 408 386. R1234yf Part No. 83 19 2 354 790 The nameplate in the engine compartment indicates which refrigerant has been used. S
Automatic Transmission Fluid 2.0L Eng 9.19 QTS. 8.69 L Automatic Transmission Fluid ATF+3 S
Brake Fluid N/A N/A BMW Brake Fluid DOT 4 with low viscosity S
Diesel Exhaust Fluid 4.15 GALS. 15.7 L BMW Diesel Exhaust Fluid. Alternativelt: NOx reduction agent AUS32 Approximate capacity. S
Engine Coolant 2.0L Eng High Temperature Circuit 12.47 QTS. 11.8 L Frostox HT-12 antifreeze and corrosion inhibitor Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts). S
Engine Coolant 2.0L Eng Low Temperature Circuit 2.85 QTS. 2.69 L Frostox HT-12 antifreeze and corrosion inhibitor Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts). S
Engine Oil Gas/Electric w/Filter 5.02 QTS. 4.75 L BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+ As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity. S
Windshield Washer Fluid w/Headlamp Washers N/A N/A Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.