Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSBMW2011X6 ACTIVEHYBRIDREPAIR AND DIAGNOSISENGINE PERFORMANCEENGINE CONTROL SYSTEMSENGINE - REPAIR (N63)ENGINE GENERALREMOVING ENGINE COVER (N63)

2011 BMW X6 ActiveHybrid

Removing engine cover (N63)

2011 BMW X6 ActiveHybridSECTION Removing engine cover (N63)

Raise engine cover (1) at the four points (see arrows) and in upward direction.

Fig 1: Identifying Engine Cover

G00480834

Courtesy of BMW OF NORTH AMERICA, INC.

Check lock (1) for damage.

Check lock (2) for damage.

Fig 2: Identifying Engine Cover Locks

G00489711

Courtesy of BMW OF NORTH AMERICA, INC.

Apply a light coating of antiseize agent to take-ups (1).

Fig 3: Locating Engine Cover Take-Ups

G00489712

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.