Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
VDM control unit inputs
From the input signals, the VDM control unit calculates the control signals to the actuators. The input signals are also checked for plausibility and used for system monitoring.
The VDM control unit receives the following input signals:
- FlexRay bus
- Front-suspension circuit pressure (analog)
- Rear-suspension circuit pressure (analog)
- Switch position detector reading (analog)
- Fluid level sensor signal (analog)
The most important control signal for the ARS function is the lateral acceleration measured by the ICM control unit, which is sent to the VDM via the FlexRay bus. Additional lateral dynamics information from the FlexRay bus which is also provided by the ICM comprises the road speed signal and the steering angle. From that, the stabilization requirement is calculated and the relevant active forces are applied. The road speed and steering angle information is also used to improve the reaction time of the system.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.