Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine shutdown
The engine shutdown is carried out on vehicles with manual transmission in the following conditions if no switch-off inhibitor is active:
- Vehicle stationary
- No gear engaged
- Clutch pedal not pressed.
The engine shutdown is carried out on vehicles with automatic transmission in the following conditions if no switch-off inhibitor is active:
- Vehicle stationary
- Selector level position D engaged
- Brake pedal operated.
On vehicles with the "Automatic Hold" function the brake pedal may be released after a vehicle standstill without starting the engine.
On vehicles with automatic transmission the engine shutdown may be inhibited. No engine shutdown is carried out after a vehicle standstill when the brake pedal is operated strongly and then released a little within one second.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.