Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBâ—Ź LIVE
HOMESERVICE MANUALSBMW2011528IREPAIR AND DIAGNOSISBODY & FRAMEWINDOWSBODY EQUIPMENT - REPAIRGENERAL51 00... NOTES ON FITTING WINDOW GUIDE SEALS
2011 BMW 528i
51 00... Notes on fitting window guide seals
2011 BMW 528iSECTION 51 00... Notes on fitting window guide seals
- Work safety when handling lubricant G13*Â
- Wear safety goggles, protective gloves and if necessary an apron.
- Do not eat, drink or smoke in the area of processing/application
- Ensure rooms are well ventilated.
- Keep heat and ignition sources well away
- In event of skin contact: Wash areas of skin affected with soap and water immediately, change work clothing which has been fouled with lubricant immediately (keep spare work clothing in reserve)
- In event of eye contact: Rinse eyes immediately with plenty of water and seek medical advice
- General notesÂ
- Use only the BMW-approved lubricant for fitting
- Application only at room and object temperatures between 18 and 25 °C
- Lubricant dries at different rates depending on the quantity, temperature and ventilation and becomes sticky
- Lubricant can only be used for fitting and not for fault elimination (e.g. grating)
- Newly painted parts may only be brought into contact with the lubricant after cooling
- Optimal bonding/attachment to the background surface is achieved after approx. 48 hours. The window guide seal must not be exposed to mechanical strain beforehand (car wash, strength test, etc.).
IMPORTANT: To avoid grating noises, do not use soapy water (low-surface-tension water with washing-up liquid) or lubricant containing silicone - Auxiliary materials and toolsÂ
- CLEANING AGENT R1 OR CLEANING AGENT R2 , cleaning cloth, plastic scraper, needle
- Lubricant G13* (manufactured by Zestron) part no. 83 23 0441 032
(*sourcing reference: BMW Parts Service)
- PreparationsÂ
- Heat and remove anti-friction agent residues with a hot air blower or clean new part thoroughly
- Immediately prior to fitting, clean the work area in order to remove silicone and grease residues
NOTE: Air drying time approx. 1 minute - InstallationÂ
- Apply a thin coating of lubricant to the reverse side of the window guide seal only
- Perform fitting within 30 minutes of applying lubricant
- Lubricant dries after fitting and becomes sticky
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.