61 13... Crimping stop parts

Special tools required: 

• 12 1 080
• 12 1 081
• 12 1 083

Spare parts for in-car electronics (housing and contacts) 

1. Crimping butt connectors and contact sleeves for comb connectors up to 2.5 mm 
2. Crimping butt connectors and contact sleeves for comb connectors larger than 2.5 mm 2 
3. Crimping contact sleeves for 4 mm ²  comb connectors and ignition cable contacts 

   Use special tool kit 12 1 080 to attach ignition cable contacts and crimp 4 mm² contact sleeves for comb connectors.

   • 12 1 081 (hand pliers)
   • 12 1 083 (nest)

   See repair instructions 

   SPECIAL TOOLS FOR WIRING HARNESS REPAIRS .

   Fig 1: Identifying Hand Pliers

   Courtesy of BMW OF NORTH AMERICA, INC.

   Release special tool 12 1 081:

   Squeeze grips (1) lightly and push release lever (2) in direction of arrow.

   Or:

   Compress handles until limit position, hand pliers unlock automatically.

   Fig 2: Compressing Hand Pliers Lever

   Courtesy of BMW OF NORTH AMERICA, INC.

   Place 4 mm² contact sleeve in nest with anti-twist safeguard (1) as far as possible.

   Fig 3: Locating Hand Pliers Safeguard

   Courtesy of BMW OF NORTH AMERICA, INC.

   Preload contact by squeezing matrix in crimping tool. Grip contact (1) firmly only, do not crimp.

   Fig 4: Identifying Crimping Tool Grip Contact

   Courtesy of BMW OF NORTH AMERICA, INC.