Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW2011335IS 2D CONVERTIBLE, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
2011 BMW 335is 2D Convertible, Standard
Quick Lookups: Fluids
2011 BMW 335is 2D Convertible, StandardSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.30 OZS. | 0.18 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.30 LBS. | 0.58 KG | R 134a | S | |||
| Brake Fluid | N/A | N/A | DOT 4 ESL (Extended System Life) Brake Fluid | S | |||
| Engine Oil | 6.90 QTS. | 6.52 L | BMW High Performance SAE 5W-30 Synthetic Oil or MOBIL 1 SAE 10W-40 Synthetic Oil | S | |||
| Fuel Tank | N/A | N/A | S | ||||
| Manual Transmission Fluid | 1.59 QTS. | 1.5 L | Manual Transmission Fluild LT3 (MTF LT3) | All vehicles equipped with a manual transmission and the N52, N54 engines require the MTFLT-3 long-term fluid. Refer to label on Transmission, if label is missing enter VIN number in EPC to acquire a new label with fluid description. MTF-LT-3 BMW P/N 22 0 409 878. No oil change required for the entire service life of these transmissions. | S | ||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON III | S | |||
| Windshield Washer Fluid | N/A | N/A | Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.