Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Modular Design of CIC Components: Notes
| Index | Explanation |
|---|---|
| 1 | Replaceable device CIC |
| 2 | DVD/CD player including CIC housing cover |
| 3 | Front panel |
| 4 | Hard disk drive |
The components listed above are defined as separate or modular. These components are attached to the main/complete head unit.
Of these components, only the faceplate remains a serviceable and replaceable component. Failure of any other internal component will necessitate the replacement of the entire CIC unit once proper authorization has been obtained through PuMA.
The functions of the individual components are briefly described in the following pages.
The installation and removal instructions for the individual components and the complete CIC control unit are available in TIS (Technical Information System) or the workshop system ISTA.
It is essential to follow ESD (Electrostatic Discharge) guidelines when replacing individual components in order to avoid damage to internal components of the CIC. These requirements also apply when storing or sending back components.
Special packaging (ESD bags, ESD boxes with film or foam material cladding) is available for this purpose and should be used instead of conventional packaging materials.
The following picture illustrates the effects of electrostatic discharge (ESD) on electronic components.
| Index | Explanation |
|---|---|
| 1 | ESD symbol (protection measures necessary) |
| 2 | ESD damage to a conductor (magnified 5000 times) |
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
