Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSBMW2009X3 STANDARDREPAIR AND DIAGNOSISBODY & FRAMETOWING SYSTEMSTRAILERS - REPAIR10 LOADING PLATFORM86 10 ... INSTALLATION POSITION OF BMW LETTERING

2009 BMW X3 Standard

86 10 ... Installation Position Of BMW Lettering

2009 BMW X3 StandardSECTION 86 10 ... Installation Position Of BMW Lettering

Top edge of lettering at same height as recess for position light (1).

Distance between drawbar member and lettering (2) is 300 mm.

Installation:

Remove grease from gluing surfaces.

Fig 1: Identifying Distance Between Drawbar Member & Lettering

Courtesy of BMW OF NORTH AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.