Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2009 BMW 335d
Fuel System - Repair
2009 BMW 335dSECTION Fuel System - Repair
- 1300 checking-setting engine-emission
- 1331 fuel pump with drive and line
- 1332 fuel filter
- 1351 injection pump, regulator, mixture regulator
- 1353 injection nozzle and lines
- 1353... Cleaning injector ducts (M67/M57/M57TU/M47TU)
- 1353... Layout of common rail system (M57TU, M57T2)
- 1353315 Removing and installing/replacing all injectors of fuel injection system (M57T2)
- 1353155 Removing and installing/replacing pressure accumulator of fuel injection system (M57TU, M57T2)
- 1353560 Removing and installing/replacing pressure sensor on pressure accumulator of fuel injection system (M57TU, M57T2)
- 1353330 Replacing all leakage oil lines (M57T2)
- 1353170 Replacing all pressure lines (M57T2)
- 1353180 Replacing pressure line (between high-pressure pump and pressure accumulator) (M57T2)
- 1353570 Replacing pressure regulator on pressure accumulator of fuel injection system (M57TU, M57T2)
- 1362 sensor for control unit
- 1362560 Removing and installing/air-mass flow sensor (M57T2)
- 1362560 Removing and installing/replacing air-mass flow sensor (M47T2, M57T2)
- 1362662 Replace the nitrogen oxide sensor after the SCR catalytic converter (M57T2 with SCR)
- 1362620 Replace the nitrogen oxide sensor before the SCR catalytic converter (with SCR) M57T2
- 1362628 Replace the temperature sensor after the oxidation catalytic converter (M57T2 with selective catalytic reduction)
- 1362627 Replace the temperature sensor before the oxidation catalytic converter (M57T2 with selective catalytic reduction)
- 1362624 Replace the temperature sensor for the SCR catalytic converter (M57T2 with SCR)
- 1362650 Replacing camshaft pulse generator (M57, M57TU, M57T2)
- 1362538 Replacing charge air temperature sensor (M57T2)
- 1362535 Replacing charge-air pressure sensor (M57TU, M57T2)
- 1362651 Replacing control sensor (M57T2)
- 1362531 Replacing coolant temperature sensor (M57TU, M57T2)
- 1362610 Replacing crankshaft pulse generator (M47TU/M57TU/M47T2/M57T2)
- 1362534 Replacing diesel particulate filter temperature sensor (M57T2)
- 1362511 Replacing intake air temperature sensor (N47, N47s, M57T2)
- 1362533 Replacing primary catalytic converter temperature sensor (M57T2)
- 1371 intake silencer
- 1372 air cleaner
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.