2003 BMW Z8 BaseFACTORY OEM SERVICE PROCEDURE

Test Group Identification

BMW supplies test group information in 6 categories:

Specific engine family test group identification number (for example: 2BMXV03.0LER) can be found on emission label in engine compartment. To cross reference test group category (catalyst monitoring, misfire monitoring, etc.) see BMW TEST GROUP IDENTIFICATION  table.

BMW TEST GROUP IDENTIFICATION

Engine Family (Test Group) (1) Engine Type Models Production Dates
Catalyst Monitoring 
3BMXV03.0LER  M54 Z4 2.5L 9/02-8/03
3BMXV03.0LER  M54 325i, 325Ci, 325xi, 525i, 330xi 9/02-8/03
3BMXV03.0M5R  M54 Z4 (3.0L) 9/02-8/03
3BMXV03.0M5R  M54 330i, 330Ci, 530i 9/02-8/03
3BMXV02.5M56  M56 325i, 325Ci 9/02-8/03
3BMXT03.0E5R  M54 X5 (3.0L) 10/02-9/03
3BMXV03.0UL2  M54 325i, 325xi, 330i 3/03-8/03
3BMXV04.4LEV  M62 540i 9/02-8/03
3BMXT04.4E53  M62 X5 (4.4L) 10/02-9/03
3BMXT04.6XHP  M62 X5 (4.6L) 10/02-9/03
3BMXV03.2S54  S54 M3 9/02-8/03
3BMXV04.9S62  S62 M5, Z8 9/02-8/03
Misfire Monitoring 
3BMXV03.0LER  M54 Z4 2.5L 9/02-8/03
3BMXV03.0LER  M54 325i, 325Ci, 325xi, 525i, 330xi 9/02-8/03
3BMXV03.0M5R  M54 Z4 (3.0L) 9/02-8/03
3BMXV03.0M5R  M54 330i, 330Ci, 530i 9/02-8/03
3BMXV02.5M56  M56 325i, 325Ci 9/02-8/03
3BMXT03.0E5R  M54 X5 (3.0L) 10/02-9/03
3BMXV03.0UL2  M54 325i, 325xi, 330i 3/03-8/03
3BMXV04.4LEV  M62 540i 9/02-8/03
3BMXT04.4E53  M62 X5 (4.4L) 10/02-9/03
3BMXT04.6XHP  M62 X5 (4.6L) 10/02-9/03
3BMXV03.2S54  S54 M3 9/02-8/03
3BMXV04.9S62  S62 M5, Z8 9/02-8/03
Evaporative System Monitoring 
3BMXV03.0LER  M54 Z4 2.5L 9/02-8/03
3BMXV03.0LER  M54 325i, 325Ci, 325xi, 525i, 330xi 9/02-8/03
3BMXV03.0M5R  M54 Z4 (3.0L) 9/02-8/03
3BMXV03.0M5R  M54 330i, 330Ci, 530i 9/02-8/03
3BMXV02.5M56  M56 325i, 325Ci 9/02-8/03
3BMXT03.0E5R  M54 X5 (3.0L) 10/02-9/03
3BMXV03.0UL2  M54 325i, 325xi, 330i 3/03-8/03
3BMXV04.4LEV  M62 540i 9/02-8/03
3BMXT04.4E53  M62 X5 (4.4L) 10/02-9/03
3BMXT04.6XHP  M62 X5 (4.6L) 10/02-9/03
3BMXV03.2S54  S54 M3 9/02-8/03
3BMXV04.9S62  S62 M5, Z8 9/02-8/03
Secondary Air Injection Monitoring 
3BMXV03.0LER  M54 Z4 2.5L 9/02-8/03
3BMXV03.0LER  M54 325i, 325Ci, 325xi, 525i, 330xi 9/02-8/03
3BMXV03.0M5R  M54 Z4 (3.0L) 9/02-8/03
3BMXV03.0M5R  M54 330i, 330Ci, 530i 9/02-8/03
3BMXV02.5M56  M56 325i, 325Ci 9/02-8/03
3BMXT03.0E5R  M54 X5 (3.0L) 10/02-9/03
3BMXV03.0UL2  M54 325i, 325xi, 330i 3/03-8/03
3BMXV04.4LEV  M62 540i 9/02-8/03
3BMXT04.4E53  M62 X5 (4.4L) 10/02-9/03
3BMXT04.6XHP  M62 X5 (4.6L) 10/02-9/03
3BMXV03.2S54  S54 M3 9/02-8/03
3BMXV04.9S62  S62 M5, Z8 9/02-8/03
Fuel System Monitoring 
3BMXV03.0LER  M54 Z4 2.5L 9/02-8/03
3BMXV03.0LER  M54 325i, 325Ci, 325xi, 525i, 330xi 9/02-8/03
3BMXV03.0M5R  M54 Z4 (3.0L) 9/02-8/03
3BMXV03.0M5R  M54 330i, 330Ci, 530i 9/02-8/03
3BMXV02.5M56  M56 325i, 325Ci 9/02-8/03
3BMXT03.0E5R  M54 X5 (3.0L) 10/02-9/03
3BMXV03.0UL2  M54 325i, 325xi, 330i 3/03-8/03
3BMXV04.4LEV  M62 540i 9/02-8/03
3BMXT04.4E53  M62 X5 (4.4L) 10/02-9/03
3BMXT04.6XHP  M62 X5 (4.6L) 10/02-9/03
3BMXV03.2S54  S54 M3 9/02-8/03
3BMXV04.9S62  S62 M5, Z8 9/02-8/03
Oxygen Sensor Monitoring 
3BMXV03.0LER  M54 Z4 2.5L 9/02-8/03
3BMXV03.0LER  M54 325i, 325Ci, 325xi, 525i, 330xi 9/02-8/03
3BMXV03.0M5R  M54 Z4 (3.0L) 9/02-8/03
3BMXV03.0M5R  M54 330i, 330Ci, 530i 9/02-8/03
3BMXV02.5M56  M56 325i, 325Ci 9/02-8/03
3BMXT03.0E5R  M54 X5 (3.0L) 10/02-9/03
3BMXV03.0UL2  M54 325i, 325xi, 330i 3/03-8/03
3BMXV04.4LEV  M62 540i 9/02-8/03
3BMXT04.4E53  M62 X5 (4.4L) 10/02-9/03
3BMXT04.6XHP  M62 X5 (4.6L) 10/02-9/03
3BMXV03.2S54  S54 M3 9/02-8/03
3BMXV04.9S62  S62 M5, Z8 9/02-8/03
(1) For test group identification, see underhood label.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.