Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 BMW Z4 2.5 3, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.10 OZS. | 0.15 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.63 LBS. | 0.73 KG | R-134a | S | |||
| Air Cond Refrigerant | 1.63 LBS. | 0.73 KG | R-134a | S | |||
| Automatic Transmission Fluid | N/A | N/A | Lifetime fluid, no fluid change required. | S | |||
| Brake Fluid | N/A | N/A | DOT 4 Brake Fluid | S | |||
| Differential Gear Oil | N/A | N/A | Lifetime fluid, no fluid change required. | S | |||
| Engine Coolant | Automatic Trans | 9.30 QTS. | 8.8 L | Ethylene Glycol long-term Antifreeze | Having corrosion inhibitors that are compatible with aluminum radiators. | S | |
| Engine Oil | w/Filter | 6.90 QTS. | 6.52 L | SAE 5W-40 and SAE 5W-30 Synthetic Oil | S | ||
| Fuel Tank | 14.50 GALS. | 54.88 L | S | ||||
| Manual Transmission Fluid | N/A | N/A | Lifetime fluid, no fluid change required. | S | |||
| Windshield Washer Fluid | w/Headlamp Washer | 5.30 QTS. | 5.01 L | Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). | S | ||
| Windshield Washer Fluid | w/o Headlamp Washer | 3.20 QTS. | 3.02 L | Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
