2003 BMW M3 2D ConvertibleFACTORY OEM SERVICE PROCEDURE

Planetary Gearset (Ravigneaux): Notes

Based on the Ravigneaux design, the A5S 360R planetary gearset is made up of two sections; front & rear. It functions as a single integral assembly with a common planetary carrier and a set of common long planetary gears. See Fig 1 . It consists of the following components:

  • Two separate ring gears.
  • Two separate input sun gears (one front, one rear).
  • One set of three long planetary gears common to both sections (front-rear).
  • One set of three short planetary gears (rear).
  • One set of three short planetary gears (front).
  • One common planetary carrier. See Fig 2 and Fig 3 .
    Fig 1: Identifying Planetary Gearset "Input-Reaction-Output" Chart
    G00317121Courtesy of BMW OF NORTH AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.