2002 BMW 330i AutomaticFACTORY OEM SERVICE PROCEDURE

Overview Of Components: Notes

The A5S 360R is an assembly of the following:

  • Four case housing design (Torque converter bell housing, pump cover plate, main and extension cases).
  • Single piece sump pan.
  • Replaceable oil filter unit.
  • Four element torque converter assembly with variably controlled lock up clutch.
  • Vane type oil pump.
  • Four multi-plate drive clutches with single sided friction plates.
  • Five multi-plate brake clutches with single sided friction plates.
  • Four Free Wheel One Way Clutches (sprag type).
  • One Planetary Gearset Assembly.
  • One Valve Body with solenoids for pressure regulation, shift control, torque converter regulated lock up and reverse lock out (combined function). See Fig 1 .
    Fig 1: Overview Of Transmission Components
    G00317108Courtesy of BMW OF NORTH AMERICA, INC.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.