2002 BMW 330i AutomaticFACTORY OEM SERVICE PROCEDURE

Diagnosis And Programming: Notes

The E46 diagnostic concept provides an minimization of fault symptom selections based on areas of selection. Follow the test schedule provided by the DIS/MoDiC. The test schedule is based on the selected fault symptom and stored fault codes. The GS 20 monitors the A5S 360R and interfacing systems. When faults are detected, the GS 20 stores the following fault codes. See Fig 1 .

Fig 1: Identifying Transmission Trouble Codes
G00375477Courtesy of BMW OF NORTH AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.